WA distributor & service centre
for Bermad Industrial Valves

Build & Supply

Critical to all CONTROL VALVE supply issues is the ability to fit out the valve so that it fulfils the function for which it is designed and continues to perform through the service life of the product.

This means that valves must be built with special care and more critically, quality materials that will complement the main valve – which in the case of BERMAD is world best standard.

Often water conditions in Western Australia demand a high level of corrosion protection and industry here is well equipped to deliver suitable outcomes for hyper saline and marine applications.

Watering Concepts not only perform this task to the highest standards, but have done so for over 30 years and right here in Belmont Western Australia.

In most cases a CONTROL VALVE can be designed and supplied within a few days – as long as it would normally take to be transported from the Eastern states to Perth. A saving in time money and freight for all our customers.

Testimonials

Watering Concepts is proud to acknowledge many loyal customers who have been working with us for 20 years and longer.

Case Studies

A client had wear issues with 300mm pressure sustaining valve, having replaced the body three times in three years.

Watering Concepts observed line pressure upstream and downstream of the valve during typical operation. The pressure differential exceeded the practical limit allowed across a valve and needed to be reduced to avoid CAVITATION and resultant damage to the valve body.

Watering Concepts installed an orifice plate to reduce the pressure differential to within normal operating levels. The sizing of the plate was chosen to take into account the flow and pressure parameters of the system.

Click here to see case studies

"All equipment and spare parts carry a 12 month warranty"